alpha wire | 711 lidgerwood avenue, elizabeth, nj 07207 tel: 1-800-52 alpha (25742), web: www.alphawire.com customer specification part no. PV0830 construction diameters (in) 1) component 1 1 x 1 hookup a) conductor 8 (168(7x24)/30) awg tc 0.168 b) insulation 0.078" wall, nom. xlpe 0.326+/- 0.006 (1) separator polyester tape, 10% overlap, min. (2) color(s) black 2) jacket 0.032" wall, nom.,pvc 0.390 (0.404 max.) a) color(s) black b) print alpha wire-* p/n PV0830 8 awg (ul) pv wire 90c wet/dry 2000v sun res -40c vw-1 rohs * = factory code applicable specifications 1) ul vw-1 sun res -40c pv wire 90c dry / 90c wet / 2000 vrms environmental 1) eu directive 2002/95/ec(rohs): all materials used in the manufacture of this part are in compliance with eu directive 2002/95/eu regarding the restriction of use of certain hazardous substances in electrical and electronic equipment. consult alpha wire's web site for compliance date of manufacture. 2) reach regulation (ec 1907/2006): this product does not contain any of the substances listed on the european union reach substance of very high concern (svhc) candidate list, dated 30 march 2010, in excess of a concentration of 0.1% weight/weight. properties
physical & mechanical properties 1) temperature range -40 to 90c 2) bend radius 10x cable diameter 3) pull tension 132 lbs, maximum 4) sunlight resistance yes electrical properties (for engineering purposes only) 1) voltage rating 2000 vrms 2) inductance 0.05 h/ft, nominal 3) conductor dcr 0.69 /1000ft @20c, nominal 4) current 80 amps per conductor @30c, maximum other packaging flange x traverse x barrel (inches) a) 1000 ft 20 x 11 x 8 continuous length b) 100 ft 12 x 10 x 5 continuous length [spool dimensions may vary slightly] www.alphawire.com alpha wire | 711 lidgerwood avenue, elizabeth, nj 07207 tel: 1-800-52 alpha (25742) although alpha wire (?alpha?) makes every reasonable effort to ensure there accuracy at the time of publication, information and specifications described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not ensure product availability. alpha provides the information and specifications herein on an ?as is? basis, with no representations or warranties, whether express, statutory or implied. in no event will alpha be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary) whatsoever, even if alpha had been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein. alpha wire | 711 lidgerwood avenue, elizabeth, nj 07207 tel: 1-800-52 alpha (25742), web: www.alphawire.com rohs certificate of compliance to whom it may concern: alpha wire part number:PV0830 PV0830 , rohs-compliant commencing with7/24/2009production this document certifies that the alpha part numbers cited above are manufactured in accordancewith directive 2002/95/ec of the european parliament and of the council of 27 january 2003,better known as the rohs directives, with regards to restrictions of the use of certain hazardoussubstances used in the manufacture of electrical and electronic equipment. the reader is referredto these directives for the specific definitions and extents of these directives. no exemptions arerequired for rohs compliance on this item. substance maximum control value lead 0.1% by weight (1000 ppm)
mercury 0.1% by weight (1000 ppm) cadmium 0.01% by weight (100 ppm) hexavalent chromium 0.1% by weight (1000 ppm) polybrominated biphenyls (pbb) polybrominated diphenyl ethers (pbde) 0.1% by weight (1000 ppm) including deca-bde 0.1% by weight (1000 ppm) the information provided in this document and disclosure is correct to the best of alpha wire'sknowledge, information and belief at the date of its release. the information provided is designedonly as a general guide for the safe handling, storage, and any other operation of the productitself or the one that it will become part of. the intent of this document is not to be considered awarranty or quality specification. regulatory information is for guidance purposes only. productusers are responsible for determining the applicability of legislation and regulations based ontheir individual usage of the product. authorized signatory for the alpha wire company: dave watson, director of engineering & qa 11/2/2012
|
